Suzuki RGV250 VJ22 Screen
€49.05
Suzuki RGV250 VJ22 Screen
This screen fits the original bodywork.
TYGA no: screenrgv
SKU: screenrgv Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, RGV250 VJ22, SuzukiBig bore kit 300cc wiseco, NSR250 MC18/MC21/MC28
€2,264.37
This 300cc Big Bore Kit is identical to the TPER-0007 300cc Big Bore Kit, but the standard 300cc pistons are replaced with high performance options.
In this case we have forged Wiseco pistons that are lighter and stronger than stock. They use Wiseco rings, clips and pins.
See below for performance details for TPER-0007.
Bore & Stroke is 59mm x 54.5mm giving a total displacement of 298cc.
Parts included in the NSR300 kit.
Cylinder x 2 (includes head studs, RC valve, pulley & nut and washers)
Rear Head x 1
Front Head x 1
Piston x 2
Ring set x 2
Piston Pin x 2
Piston Clip x 4
S/E Bearing x 2
Head gasket x 2
Cylinder gasket x 2
RC Valve cables x 4
Water hose x 1
Exhaust Manifold x 2 (to fit TYGA pipes)
Other information:
There is no problem about the RC valves hitting the piston due to thin cylinder wall thickness. This is not an issue on our kit as it’s using different
cylinders, not modified NSR250. They are genuine OEM Honda cylinders, made and plated in Japan to their typical high quality.
The RC valves are easier to adjust than ever on the 300 kit, as there’s only one adjuster screw to play with, and each cylinder marked at the correct ‘fully open’ position for simple setting.
Exact Jetting requirements for your area and application cannot be provided due to differing atmospheric conditions around the world. However, following are some base settings to work from:
MC21 Std bottom end, Wire splice, TYGA Pipes, Airbox lid mod with filter.
Temp: 29 C
Press: 1015mb
Hum: 65%
Alt: 30m
MJ – #182/#185
JN – Std./Std.
SJ – #38/#38
AS – 1.5 turns out
PwrJ – Std./Std.
Tip: Cooler temps, higher pressure and/or lower humidity require richer jetting. High altitude requires leaner settings. Starting off with rich settings will in the worse case foul a plug. Too lean a setting may destroy the engine.
This jet set-up is for guidance only. TYGA Performance cannot be held responsible for any engine damage incurred due to incorrect settings.
At present, this kit is available by special order. Each kit takes approx. four weeks to prepare.
TYGA no: TPER-3007Â
SKU: hon-10390 Categories: ALL products, High performance, High performance, High performance, High performance, Honda, NSR250 MC18, NSR250 MC21, NSR250 MC28, ShopSet full race system under belly with short stainless silencer with carbon cap, Honda MSX125 GROM
€480.85
.Set, Pipe, Full System, Underbelly, MSX125 Grom, Carbon Oval/Carbon End Cap, Short
This full race system has been specifically designed for the MSX125 to maximise power. Made in stainless steel with spring mounted carbon silencer this system increases performance, saves weight and enhances the looks of the bike. Sounds great too! ( A db killer is included)
Total weight of the set is 2300 grams
Performance and Dynograph
The blue trace shows the 100% standard Honda MSX125 Grom, compared to the red trace, which is after installing the TYGA Full System set (EXPS-0064) with no other changes to the stock bike.
A useful increase in peak power and further gains could probably be had with remapping etc.
Similar Products:
Please also see:
EXPS-0064 Stainless, Underbelly, with long silencer
<iframe width= 560 height= 315 src= https://www.youtube.com/embed/mSTQKSWArE0 frameborder= 0 allowfullscreen></iframe>
TYGA no: EXPS-0068
SKU: MSX-10348 Categories: ALL products, Exhausts, Exhausts, Exhausts, Honda, MSX125 2013 - 2015, MSX125 2021-, MSX125SF 2016 -2020, ShopSpeedo Cable, VFR750 RC36-2
€10.91
Steering Stopper, Honda VFR750R RC36 (94-97)
Steering stopper for race use. Reduces degree of movement in steering. Easy to attach using hole for the horn on the standard lower triple clamp.
TYGA no: TYPP-0034
SKU: hon-11520 Categories: ALL products, CBR250R MC19, CBR250RR MC22, CBR400RR NC23, CBR400RR NC29, Honda, RC36-2 -> RC30 replica products, RVF400RR NC35, Shop, Stocklist, Various parts, various parts, various parts, Various parts, VFR400RR NC30, VFR750F Gen 4, 94-97, VFR750R RC30Cowling, Side, RH, Green, Ninja 250R 2008 -12
€259.23
Cowling, Side, RH, Green, Ninja 250R 2008 -12
TYGA no: 55028-0272-777
SKU: kaw-10197 Categories: ALL products, Kawasaki, Kawasaki OEM parts, Ninja 250R 2008- 12, ShopNut, Clutch Pivot Bolt, MC28
€2.86
Nut, Clutch Pivot Bolt, MC28
TYGA no: 90201-415-000
SKU: hon-11130 Categories: ALL products, High performance, Honda, New OEM Honda parts, NSR250, NSR250 MC28Forged Aluminium Racing wheel set, 5 spoke, PVM, Front 3.50 x 17, Rear 5.5 x 17, Gold.
€1,859.00
Forged Aluminium Racing wheel set, 5 spoke, PVM, Front 3.50 x 17, Rear 5.5 x 17, Gold.
This racing wheel set has been designed specifically for the following model applications:
NX5 RS250R
RC30 VFR750R
RC45 RVF750
This exciting 5 spoke forged racing wheels set, has been exclusively developed by TYGA Performance and PVM to bring you the ultimate wheel combination for your motorcycle. PVM is a long established German wheel manufacturer, supplying motorcycle manufacturers such as BMW and racing teams in Moto GP such as Tech3 as well other series around the World. For this project, TYGA Performance reached out to PVM to supply a wheel specific to the requirements of the motorcycles we ride and love. The result are these beautiful and functional wheels you see on these pages.
Technical Features of PVM Forged Aluminium Wheels
Forged from AlMgSi1 aluminium
Crop-milled rim
100% quality control of forging process
Completely CNC-manufactured and thus virtually 100% free of imbalance and faults
Low unsprung weight and low rotating mass, drastically improving acceleration, braking and handling
More stable than conventional cast wheels
Far greater corrosion resistance compared to magnesium wheels, without increased mass.
Wheels come with all necessary bearings and hub spacers and valves
Specific details and features of the TYGA PVM wheels designed for MC28, NC30, NC35 application.
For the RVF400, VFR400 and MC28 NSR250: Please see set TWHL-0012
Fitment: They are a direct fitment for the models listed. The rears are specifically designed by us here at TYGA to fit the Honda street bike hubs without the need to modify or change the rear brake rotor mounting bolts and the fronts have the correct bearing spacing for Honda street bikes of that period, so no time wasted by the user adapting them to fit. Simply use together with the OEM wheel spacers.
Weight: Weight. These wheels are super light and suitable for racing. The front 3.50 weighs: 2.738 kg, the 5.00 rear weighs: 3.073 KG and the 5.50 weighs: 3.228 kg
Strength: These wheels are made from forged aluminium so super strong but much lighter than cast aluminium wheels They are stronger and less prone to corrosion and cracking than magnesium. See load chart below for details of maximum weights.
Peace of mind: They are brand new compared to most lightweight wheels available for these models which are mostly around 20 years old and therefore past their safe use date
Style: They look stylish and modern with the Y spoke design and the tough and elegant finish in gold, white and satin black give the perfect finishing touch to your motorcycle’s appearance.
Torque specs
Front Axle Nut: 60 Nm (43 ft-lb)
Rear Wheel Nut: 120 Nm (87 ft-lb)
TYGA no: TWHL-0013
SKU: alg-10302 Categories: ALL products, Honda, PVM Wheels, PVM wheels, RS250R NF5 / NX5, VFR750R RC30Fairing set street T8, CBR250RR MC22
€1,247.92
This set of bodywork comprises all the bodywork parts including the passenger seat cover By ordering in one set you save money on the parts as well as save on shipping costs if you made the order in two or more separate shipments.
Please note parts are supplied unpainted and in white primer.