Needle roller bearings, set MC16 and MC18 (R2J/R4J)
€51.65
Crankshaft Bearing, Right, NSR250 MC21/28
Genuine OEM KOYO main crankshaft bearing for your Honda NSR250 MC21/28.
See also TYPP-0012SET for set consisting of one each of the left, centre and right crank bearings.
TYGA no: TPER-5008
SKU: hon-11432 Categories: ALL products, High performance, Honda, NSR250, NSR250 MC18Carbon cover set instrument surrounds, Honda
€89.29
Carbon cover set instrument surrounds, Honda
Theses covers fit snuggly over the original plastic Honda gauge covers and adds a sporty appearance. They are also ideal for hiding any ugly scratches or dents that may have occurred over the years. They fit in second and can be held in place with a dab of glue or silicone adhesive. Note, these covers are also available as separate covers.
This product is suitable for the following models:
MC21 NSR250
MC22 CBR250RR
NC29 CBR400RR
NC35 RVF400
SC28 CBR900RR
TYGA no: BPCC-0028
SKU: hon-10615 Categories: ALL products, Carbon, CBR250RR MC22, CBR400RR NC29, CBR900RR 1992- 95, Honda, NSR250 MC21, RVF400RR NC35, Shop, Various parts, Various partsSilencer aluminium round 380mm (4 stroke) 2
€206.30
Silencer, Aluminium, Round, 2 x 380 mm., Assy.
This silencer has polished stainless steel endcaps and a tough anodized aluminium tube for a lightweight and attractive finish. Free flowing, this silencer not only allows for more power but gives a much more rewarding audible experience over stock. This system may not comply to specific country noise emission regulations and is not homologated for street use.
The ‘slip-on’ mount is designed to fit any system with a 2 external diameter tail pipe. It is secured in place with two springs, which align with the spring hooks already fitted to the TYGA pipe. A silencer mounting clamp is also provided to secure the silencer to the bike.
Two extra (stainless) spring hooks are included and can then be welded to any other system that may need modification to fit the silencer.
Compatible with TYGA and other systems which use a 2 inch external diameter tail pipe, this silencer uses a 4 inch x 380 mm. outside aluminium tube.
TYGA no: EXSL-0040
SKU: alg-10138 Categories: 4 stroke exhaust sets, ALL products, exhaust system replacement parts, Exhaust systems, Exhausts, Exhausts, Exhausts, Honda, RVF400RR NC35, Shop, Silencers, VFR400RR NC30, VFR750F Gen 4, 94-97Seat support GP-T, Honda VFR400/RVF400
€50.22
Seat Support, (GRP), NC30/NC35, GP-T
This product is to be used with subframe TYLY-0135 and seat cowlings BPFT-9034 and BPCT-9034.
TYGA no: BPFX-9234
SKU: hon-10587 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork and carbon, VFR400RR NC30Stay, wire harness connector, Honda RS250R NXA
€4.64
Airbox, Carbon/Kevlar, NSR250 MC21/MC28
This high quality carbon/Kevlar air box is an adaptation of the HRC air box and has the following features.
Maximum volume, more than double the size of the stock air box for better flow and power
High flow, large area foam filter for street use
Snug fitting rubber base to prevent leaks around carb insulators
Designed to be used with a full street harness as well as race harness
Can be used with MC21 and MC28 models or combination of either model (fuel tanks, harnesses and carburetors)
Allows for use of carburetor solenoids and supplied with special mounting hardware
Allows for use of two stroke oil pump and supplied with holes for cables and lines as well as blanking plugs
Uses HRC seal gap , part number 64234-NX5-770 for a good seal with the fuel tank
Built in high grade epoxy and carbon/kevlar for beauty and light weight
Provided with a hole and seal for external fuel cock as well as a short type for racers who want ease of removal of fuel tank.
See also similar product in GRP: BPFX-0007
TYGA no: BPSY-0322
SKU: hon-11384 Categories: ALL products, Honda, RS250R NF5 / NX5, RS250R NXA, Various partsUpper Cowling, Race, GRP, Stock Shape, VJ21
€169.06
Upper Cowling, Race, GRP, Stock Shape, VJ21
TYGA no: BPFU-1019
SKU: suz-10126 Categories: ALL products, Bodywork, Bodywork and carbon, RGV250 VJ21, Suzuki, Suzuki RGV250Upper cowling (GRP) NX6, NSR500V
€299.78
Frame Cover, Pair, Carbon, RGV250 VJ21 (Frame without Steering Damper)
These lightweight carbon covers fit over the frame and they are designed to protect against scratches and damage to the frame in the event of an accident.
Note that some examples of the VJ21 had no steering damper mounting boss. Also some other frames have the steering damper mounting boss in a different position. For those frames, ypou also can ise thsi set this set and cut a hole to suit.
See also Set: BPCC-7021 Frame Cover, Pair, Carbon, RGV250 VJ21 (Frame with Steering Damper)
Exhaust spring 4 stroke standard
€2.21
Exhaust spring 4 stroke standard (alg-10128)
“swivel head”
TYGA no: EXSG-0002
SKU: alg-10128 Categories: 4 stroke exhaust sets, ALL products, CBR125R/CBR150R 2004-10, CBR125R/CBR150R 2011-, CBR250R 2011 - 15, CBR250R MC19, CBR250RR MC22, CBR300R 2014-, CBR500R, Exhaust systems, Exhausts, Exhausts, Exhausts, Exhausts, Honda, Kawasaki, KTM, Ninja 250R 2008- 12, Ninja 250R/300R 2013 -, RC 390, RVF400RR NC35, Shop, Various parts, Various parts, various parts, Various parts, Various parts, Various parts, VFR400RR NC30, VFR750F Gen 3 90-93