Chain slider, RS250 NX5
€44.99
Airbox, Carbon/Kevlar, NSR250 MC21/MC28
This high quality carbon/Kevlar air box is an adaptation of the HRC air box and has the following features.
Maximum volume, more than double the size of the stock air box for better flow and power
High flow, large area foam filter for street use
Snug fitting rubber base to prevent leaks around carb insulators
Designed to be used with a full street harness as well as race harness
Can be used with MC21 and MC28 models or combination of either model (fuel tanks, harnesses and carburetors)
Allows for use of carburetor solenoids and supplied with special mounting hardware
Allows for use of two stroke oil pump and supplied with holes for cables and lines as well as blanking plugs
Uses HRC seal gap , part number 64234-NX5-770 for a good seal with the fuel tank
Built in high grade epoxy and carbon/kevlar for beauty and light weight
Provided with a hole and seal for external fuel cock as well as a short type for racers who want ease of removal of fuel tank.
See also similar product in GRP: BPFX-0007
Clutch Cable, MC21
€47.38
Clutch Cable, MC21
This clutch cable is an alternative for the Honda OE part 22870-KV3-680.
TYGA no: TYPP-0021
SKU: hon-10828 Categories: ALL products, Honda, NSR250, NSR250 MC21, Various partsFairing stay side pair , Honda VFR400 NC30
€33.29
Fairing Stay, Side, Pair, VFR400R NC30, GP-T, Assy.
Made in stainless steel and designed specifically for the VFR400R NC30 GP-T fairing, these side stays fit to the frame in the same position as the stock Honda stays and allow for a little more adjustment. They are supplied with bushes so when the stays and bushes are used together, they provide the correct position for perfect fitment of the GP-T fairing. This product can also be used with any other race fairings or stock application.
TYGA no: BPSY-0189
SKU: hon-10586 Categories: ALL products, Bodywork, Bodywork and carbon, Honda, VFR400RR NC30Undertray street GRP GP-T, Honda NSR250 MC21/MC28
€75.27
Undertray, Street, (GRP), NSR250 GP-T
This product is to be used with BPFT-9033, BPFT-9133, BPCT-9033 and BPCT-9133 seat cowlings
Also to be used with BPFX-9133 Registration Plate Holder GP-T.
Note the following products are all compatible with the above seat cowlings and are interchangable between the MC21 and MC28
BPFX-9033 Undertray Street GRP
BPCX-9033 Undertray Street Carbon
BPFX-9333 Undertray Race GRP
BPCX-9333 Undertray Race Carbon
TYGA no: BPFX-9033
SKU: hon-10469 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork and carbon, Bodywork and carbon, NSR250 MC21, NSR250 MC28, ShopVelocity Stacks, NC30, Kit, 4 pcs
€149.37
Fuel Tank, GRP, VFR400R NC30, Unpainted
Top quality reproduction of the steel NC30 fuel tank in GRP. This product is a direct replacement for the stock NC30 fuel tank and saves approx. a third of the weight of the stock one (2.6 kg ours, 3.9kg for the steel one).
Using specially formulated epoxy resin for fuel resistance, this tank has been tested with a range of fuels from 95 unleaded pump fuel to E85 (85% ethanol).
Laminated with a Kevlar layer for abrasion and puncture resistance, this fuel tank is both strong and light. Unlike most aftermarket fuel tanks, this one is designed so that there is no compromise with installation and through use of high quality CNC machined aluminium inserts, retains the original associated hardware including the stock Honda or keyless fuel tank filler caps and stock fuel cock.
Like the stock Honda fuel tank, it has the correct plumbing for the Honda type breather valve incorporated in the design and also the overflow/drain tube. Uses the stock Honda mounting rubbers for ease and peace of mind in fitment.
Front Fender, Green, Ninja 250R/300R 2013 -18
€80.21
Front Fender, Green, Ninja 250R/300R 2013 -18
TYGA no: 35004-0318-777
SKU: kaw-10182 Categories: ALL products, Kawasaki, Kawasaki OEM parts, Ninja 250R/300R 2013 -, ShopSeat set with carbon street, Honda NSR250 MC28
€647.60
This set of bodywork is designed to replace the stock seat cowling with the street version of our GP Race Seat cowling and includes all parts needed to do the conversion. The kit comprises the parts below which are also available separately.
We make four versions of our NSR250 GP Race seat cowling for use in 8 different race and street sets. . For the MC21 and MC28, we recommend ordering one of the complete kits below (BPFS-****) which includes all the necessary parts to complete the modification.
BPFS-0003 (street)
BPFS-0004 (race)
uses BPFT-9002 MC21 with carbon front section
BPFS-0059 (street)
BPFS-0060 (race)
uses BPFT-9102 MC21 all GRP construction
BPFS-0004 (street)
BPFS-0005 (race)
uses BPFT-9012 MC28 with carbon front section
BPFS-0045 (street)
BPFS-0046 (race)
uses BPFT-9112 MC28 all GRP construction
The advantages of this seat cowling over stock include:
– Design allows for integrated LED Tail light ( BPLT-0008) for flush fitment and new lighter registration/license plate holder ( BPFX-9006). For race use, location for LED Tail light acts as air vent
– higher at the rear, to give the bike a more agressive stance
– better rider control by use of enclosed seat area
– improved strength with precision in design and fitment as well as lighter weight.
TYGA no: BPFS-0005Â
SKU: hon-10241 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, By model, Honda, NSR250 MC28, ShopRubber shield head Light, Honda VFR400 NC30
€17.72
Fuel Tank, Carbon, VFR400R NC30
Top quality reproduction of the steel NC30 fuel tank in carbon fiber. This product is a direct replacement for the stock NC30 fuel tank and saves approx. a third of the weight of the stock one (2.6 kg ours, 3.9kg for the steel one).
Finished in high quality UV resistant clearcoat to show off the beauty of the carbon weave, and using specially formulated epoxy resin for fuel resistance, this tank has been tested with a range of fuels from 95 unleaded pump fuel to E85 (85% ethanol).
Laminated with a Kevlar layer for abrasion and puncture resistance, this fuel tank is both strong and light. Unlike most aftermarket fuel tanks, this one is designed so that there is no compromise with installation and through use of high quality CNC machined aluminium inserts, retains the original associated hardware including the stock Honda or keyless fuel tank filler caps and stock fuel cock.
Like the stock Honda fuel tank, it has the correct plumbing for the Honda type breather valve incorporated in the design and also the overflow/drain tube. Uses the stock Honda mounting rubbers for ease and peace of mind in fitment.
TYGA no: BPAC-0016
SKU: hon-11397 Categories: ALL products, Bodywork and carbon, Carbon, Honda, Shop, Various parts, VFR400RR NC30