Triple Clamp Set, CNC, Silver 3D Top Triple Clamp, Black Lower Clamp, CBR600RR Forks to fit MC21/MC28
€673.59
CNC machined TYGA triple clamp set for your NSR250 MC28.
These stylish, all aluminium triple clamps are a direct replacement for the MC28 triple clamps, and with the help of FEA testing not only do they look fanstastic, but they perform!
They are delivered ready to fit with all necessary bearings and bottom seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ key holder fitted, which can be removed for racing.
The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.
Designed and CNC machined in house by TYGA from aircraft spec 6061-T6 alloy.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-3306
SKU: hon-11246 Categories: ALL products, CNC parts, CNC parts, CNC parts, Honda, NSR250, NSR250 MC28, Stock list, all modelsThrottle housing HRC NSR250, NX5 / NXA
€206.99
Throttle Housing. NSR250, HRC, Assy
This throttle is a reproduction of a factory HRC one used on the factory NSR250s in the 1990s and similar. For one of our projects, a customer kindly sent us the scan of the HRC part and from that we were able to reproduce this almost impossible to find part. The actual housing is CNC machined in 6061 T6 aluminium. The machining marks are then removed by bead blasting and then the part sprayed black to faithfully reproduce the look of the original factory cast one. The actual throttle is 3D printed in tough Nylon. The throttle uses an M6 type cable adjuster screw to secure to the cable and about 45 degrees of rotation of the throttle, for 32mm movement on the throttle cable.
Note, this is not plug and play for any motorcycle that is available from Honda or even HRC for that matter. It was designed for unobtainable factory NSR250 motorcycles and the like and will NOT fit your MC21, MC28 etc. However, it is an interesting and useful product for anyone wanting a special looking throttle and willing to adapt it to their project. We wanted this for our NX5 factory racer project which is still in development and we plan to hook it up to Keihin SPJ carburetors. If anyone else wants to do a similar project then hopefully, this will useful to them.
TYGA no: TPER-0077
SKU: hon-11223 Categories: ALL products, CNC parts, Honda, RS250R NF5 / NX5, Shop, Various partsStay standard, side cowl Right, Honda VFR400 NC30
€21.43
Fuel Tank, Carbon, VFR400R NC30
Top quality reproduction of the steel NC30 fuel tank in carbon fiber. This product is a direct replacement for the stock NC30 fuel tank and saves approx. a third of the weight of the stock one (2.6 kg ours, 3.9kg for the steel one).
Finished in high quality UV resistant clearcoat to show off the beauty of the carbon weave, and using specially formulated epoxy resin for fuel resistance, this tank has been tested with a range of fuels from 95 unleaded pump fuel to E85 (85% ethanol).
Laminated with a Kevlar layer for abrasion and puncture resistance, this fuel tank is both strong and light. Unlike most aftermarket fuel tanks, this one is designed so that there is no compromise with installation and through use of high quality CNC machined aluminium inserts, retains the original associated hardware including the stock Honda or keyless fuel tank filler caps and stock fuel cock.
Like the stock Honda fuel tank, it has the correct plumbing for the Honda type breather valve incorporated in the design and also the overflow/drain tube. Uses the stock Honda mounting rubbers for ease and peace of mind in fitment.
TYGA no: BPSY-0325R
SKU: hon-11413 Categories: ALL products, Bodywork and carbon, Carbon, Honda, Shop, Various parts, VFR400RR NC30Aprilia RS250 Screen MKII(98-06)
€49.05
Aprilia RS250 Screen
This screen fits the original bodywork.
TYGA no: screenrs2
SKU: apr-10061 - apr-10062 Categories: ALL products, Aprilia, Bodykit replacement parts, Bodywork, Bodywork and carbon, RS250Piston No mark, MC21/28
€123.97
Piston No mark, MC21/28
TYGA no: 13103-KV3-830
SKU: hon-11180 Categories: ALL products, Honda, Honda OEM products, New OEM Honda parts, New OEM Honda parts, NSR250, NSR250 MC21, NSR250 MC28Carbon Console, (GRP) KTM RC125/200/250/390
€200.66
Console, (Carbon) KTM RC125/200/250/390
Replacement part to be used on TYGA upper cowling BPCU-7231(p)
TYGA no: BPCX-7531
SKU: ktm-10106 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, KTM, RC 125/200, RC 390Carbon front fender, monster style gloss, Honda MSX125 Grom 1st/2nd/3rd gen.
€192.39
Front Fender, (Carbon) Monster Style, MSX125 Grom. This Monster front fender looks much neater than the slab styled Honda part. Made in lightweight carbon fiber, it actually weighs half the stock plastic one and saves a whopping 200g! This fender is supplied in a gloss finish. We also do a satin version, BPCF-7128f
TYGA no: BPCF-7128g
SKU: MSX-10069 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Honda, MSX125 2013 - 2015, MSX125 2021-, MSX125SF 2016 -2020, ShopHandle bar set black, Honda CBR500
€234.92
Handlebar Set, Black, CBR500R.
This CNC machined handlebar set is designed to change the handlebars to be up to 25 mm. lower from the stock position giving a more sporting riding position. The ergonomics work very well allowing more weight over the front end for better control, while putting the rider’s upper body lower behind the fairing for better areodynamics and less fatigue at high speed riding.
Black, order TYLY-1669
Silver, order TYLY-0669
Please note the steering is limited when using this product and as a result, the steering lock cannot be used.