VHM piston (14mm piston pin) RS125 NF4 1987-’94 – RS250 NF5 1987-’92
€137.00
Kit, Fairing Set (GRP), Honda NX5 RS250R (1995 NSR250 Style)
Complete Bodywork kit which consists of the following products:
Upper Cowling Race, (GRP) NX5 RS250R (1995 NSR250 Style) (BPFU-9336)
The upper fairing is modelled off the 1995 NSR250 racer, but will fit any NX5 which has the ram air through the fuel tank system. Made from high quality epoxy resin and 200 gram glass fabric, this product is both light and strong. It will tend to flex and not shatter in the event of an accident and hold up well to minor crashes. It is finished in primer ready for paint. To be used with lower cowling BPFL-9036.
Lower Cowling, (GRP) NX5 RS250R (Late Model Style) (BPFL-9036)
The lower fairing is modelled off the ram air version of the NX5 RS250R but will fit any NX5 which uses a stock upper as far as we can tell. Made from high quality epoxy resin and 200 gram glass fabric, this product is both light and strong. It will tend to flex and not shatter in the event of an accident and hold up well to minor crashes. It is finished in primer ready for paint. To be used with upper cowling BPFU-9036
Seat Cowling Race (GRP) NX5 RS250R (1995 NSR250 Style) (BPFT-9036)
This seat cowling is modelled on the 1995 factory NSR250 racer look as ridden by Ukawa, Okada, Romboni, Jacque etc. and is a direct fit for the NX5. The seat cowling uses a special seat support which bolts to the subframe using existing mounting lugs and the seat cowling is covered underneath for streamlining and protection of the PGM and connectors. It is easy to install and being made from high quality epoxy resins and top quality glass fabric is strong and crash resistant.
Seat Support NX5 RS250R (BPFX-9036)
Screen Clear NX5 RS250R (1995 NSR250 Style) (SCRE-0176)
TYGA no: APHO12521717
SKU: alg-10401 Categories: ALL products, Honda, RS250R NF5 / NX5, Shop, Various parts, VHM productsExhaust Hanger Stay, Pair, Carbon, RGV250, VJ23
€108.42
Hi-Flo Snorkel, Air Box, RGV250 VJ23
This Hi-Flo Snorkel is dyno developed in-house by TYGA Performance to eliminate the restriction of the standard VJ23 air box snorkel.
The RGV250 VJ23 has it’s true potential restricted in three main areas; Exhausts, CDI and of course the standard air box snorkel.
While just replacing the snorkel will obviously have a small benefit, it is best used in conjunction with our other VJ23 power up parts.
Available in Black/Red and All Black please choose your preferred colour in the options below.
Please see TPER-0082 for all the parts you need to build the ultimate VJ23 street weapon!
This is a 3D printed product using tough and durable materials. Some surface imperfections may be visible, but this in no way affects the fit or performance of the product.
We have 2 color option, Red/black and all black.
please specify in comment box at checkout what color you want.
Carbon tankshields set, Honda CBR600 2005-6
€270.91
These high quality carbon parts replace the cheap looking plastic original parts supplied by Honda
Carbon set, Suzuki GSX 1000 K7-K8
€387.60
Front fender
Rear Hugger
Chain guard
Direct replacement of the original Suzuki part
Buy a complete set and it saves you money.
Let your bike stand out from the crowd with these beautiful carbon fibre products.
PLEASE NOTE: all ” TYGA” logo stickers on the carbon products can be easily removed because it is applied last above the clearcoat finish.
Exhaust stay hanger (pair), Honda NSR250 MC18 (1988)
€35.22
This pair of stays replaces the stock rear passenger peg hangers and is required to mount the Tyga Exhaust system EXCS-0003 on the 1988 MC18. Not suitable or required for the 1989 version with the flip down passenger pegs.
TYGA no: BPSY-0130
SKU: hon-10415 Categories: 2 stroke exhaust sets, ALL products, Exhausts, Exhausts, Honda, NSR250 MC18, ShopFront Fork Preload Adjusters (Pair), ninja 400
€200.55
Front Fork Preload Adjusters, Pair, Ninja 400
These fully functional preload adjusters replace the blank end caps on the stock Ninja 400 front suspension. These caps allow the rider to increase the amount of preload on the internal springs, allowing for a better set up for your riding style or conditions. Essential for spirited riding through the twisties or track days and racing.
This modification allows preload to be increased from the stock setting by 12mm. The minimum setting gives the same preload as stock.
Supplied in red and blue anodised finish, these adjusters are as beautiful as they are functional.
TYGA no: TYLY-0099k
SKU: kaw-10100 Categories: ALL products, Exhausts, Kawasaki, Ninja 400R 2018-, Various partsSeat set RVF , NC35 (no taillight holes)
€242.59
Stock shape seat cowling, race with no taillight holes. Single seat, direct replacement for stock NC35 seat cowling in the same shape but with the exact top part of the RC45 single seat replacing where the passenger seat was. This seat cowling uses OEM seat pad.
Please note, to order this product with taillight holes, please order BPFT-9004.
Compatible Parts:
All Tyga Performance and Honda OEM panels. Retains use of Honda OEM seat pad
TYGA no: BPFT-9104
SKU: hon-10420 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Honda, RVF400RR NC35, ShopTankcover rear RVF, NC35
€147.09
This unpainted cover fits over the stock NC35 tank in minutes. Ideal for covering damaged tanks.
TYGA no: BPFX-9201
SKU: hon-10145 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, RVF400RR NC35, Shop