Seat Pad (reproduction), HRC RS125 NX4
€22.73
Holder, Carbon, Brake Hose, NSR500V Style
This carbon brake holder is a faithful reproduction of HRC part 43150-NX6-000 used on the HRC NSR500V GP bike.
It allows for removal of the stock chain guard by providing a safe way of securing the rear brake line on any Pro Arm model such as the MC28, NC30 and NC35. To install this holder, it is necessary to drill and tap two small mounting holes in the swing arm to secure the holder using the bolts and washers provided with the holder. The holder is also supplied with cable ties and rubber hose suitable for braided brake lines in order to keep the brake line held in position while at the same time looking neat and tidy.
Important: care should be taken during installation to allow adequate clearance of the brake line with the chain and rear wheel when the bike is being ridden allowing for movement due to suspension etc.
TYGA no: BPSP-0009
SKU: hon-11421 Categories: ALL products, Bodywork and carbon, High performance, Honda, NSR500V NX6, RS250R NF5 / NX5, RS250R NXA, Various partsCarbon tank shields, Yamaha R6 2006-7
€258.68
This product replaces the cheap looking plastic panels which fit between the frame and the tank on the R6. This product comprises one left and one right panel which can be fitted in minutes. Front part held in place by Velcro provided.
TYGA no: BPCC-7409
SKU: yam-10023 Categories: ALL products, Carbon, Shop, Yamaha, YZF-600 R6 2006- 7Sub frame GP-T, Honda VFR400/RVF400
€184.32
This strong but lightweight subframe replaces the stock item when used as part of the NC30/35 GP-T style seat cowl kit. Essential for mounting the seat cowl, this component is supplied with all brackets and mounting points to substitute this for the OEM Honda item.
Compatible Parts:
Only to be used with NC30/35 GP-T kit parts, battery box TYLY-0130, seat cowling BPFT-9034 and BPCT-9034, undertray BPFX-9034 and BPCX-9034etc.
TYGA no: TYLY-0133
SKU: hon-10594 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, RVF400RR NC35, VFR400RR NC30VHM cylinder head (2 pieces), Honda NSR250 MC21/MC28
€604.90 €544.41
VHM cylinder head (2 pieces), Honda NSR250 (alg-10096)
VHM are a respected manufacturer of high quality racing parts used by factory teams world wide, and we are now pleased to be able to offer their cylinder heads for use on the NSR250
VHM produces exchangeable cylinder heads for two-stroke engines in motocross and road racing. With the experience gained in two-stroke tuning, VHM develops products of high quality.
During intensive tests, on the racetrack as on the VHM dyno, the cylinder head showed a better temperature development in the cylinder head. A lower engine temperature followed. The explanation of this phenomenon is the use of a special aluminum alloy which has a very good heat transference. Another advantage of the material is its resistance to detonation.
The VHM cylinder head is designed with removeable combustion chamber inserts so that changes of compression ratios are quick and simple, and no more wasted head gaskets thanks to the O-ring design
This head set comes with following parts:
2x cylinder head
2x standard insert (12.60cc)
These heads use a centrally located spark plug and coolant outlet spigot just like the standard NSR rear cylinder. Therefore an HRC style hose is required which must also be ordered.
1x HRC style coolant hose for front head (not shown) part no. alg-10102
TYGA no: AA33054
SKU: alg-10096 Categories: ALL products, High performance, High performance, Honda, NSR250 MC21, NSR250 MC28, Shop, VHM productsExhaustset stainless steel carbon silencer round, Honda CBR150
€520.76
This full race system has been specifically designed for the CBR150 to maximise power. Made in stainless steel with spring mounted carbon silencer this system significantly increases performance, saves 4.8 kg in weight (TYGA system 1.4 kg, stock system 6.2 kg!) and enhances the looks of the bike. Sounds great too!
TYGA no: EXPS-0008Â
SKU: hon-10286 Categories: 4 stroke exhaust sets, ALL products, CBR125R/CBR150R 2004-10, Exhausts, Honda, ShopSilencer, Carbon, Round, Slip-On, RVF400, Assy.
€381.35
This easy to fit bolt on silencer replaces the stock heavy aluminium one on the stock system and is an alternative to the more expensive full race system. Constructed from lightweight carbon fibre with stainless steel exit cap, and aluminium mount cap, it fits in minutes using the original hardware. Stainless steel mounting clamp is provided when you purchase this product.
Note, this silencer may not be legal for some states and territories
TYGA no: EXSL-0022
SKU: hon-10883 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Exhausts, Honda, RVF400RR NC35, Silencers, Stock list, all modelsMeter Stay Extension
€12.29
Replacement meter stay extension nylon shaft. Suitable for the following models:
BPFS-0012
BPFS-0019
BPFS-0032
BPFS-0033
See table for application of meter stay extensions with our body kits:
Carbon under cowling, Honda MSX125 GROM
€303.55
Carbon front fender “sport style”, Honda MSX 125 (MK1 MK2) Monkey 125 2018-
Sports style Carbon front fender to give your Monkey 125 or MSX125 Grom* a clean and unique appearance. Easy install with mounting bolts provided.
See also BPFF-7142 for GRP version.
*Note that when this fender is installed on the MSX125 Grom, it uses using just the four bolts in front of the fender and the two mounting holes behind the fork leg for the stock fender on the Grom are not used. For the Monkey, it mounts on the fork guard mounting holes.
TYGA no: BPCL-7048
SKU: msx-10474 Categories: ALL products, Bodywork and carbon, Honda, MSX125 2021-, Shop