Carbon sprocket cover, KTM Duke125/200
€110.40
Sprocket Cover, (Carbon), KTM125 Duke and 200 Duke
This lightweight carbon sprocket cover weighs less than the stock one and adds style to your ride.
Please note, this product fits the following models
125 Duke
200 Duke
Let your KTM RC stand out from the crowd this beautiful carbon product.
KTM powerpart!
TYGA no: BPCC-7231
SKU: ktm-10025 Categories: ALL products, Bodywork and carbon, Carbon, Duke 125/200 2012- 16, KTM, ShopRear sprocket aluminium gold, ZXR250/300 GSX600/750/1000 R6/R1/R25/R3
€67.41
Upgrade your bike with TYGA Sprockets.
Designed and machined in house from super strong 7075 T6 aluminium, and then anodized in gold colour for superior corrosion and abrasion resistance.
TYGA no: TYSR-0103-42TÂ - TYSR-0103-47TÂ
SKU: alg-10156 - alg-10161 Categories: ALL products, By product, Kawasaki, Ninja 250R 2008- 12, Ninja 250R/300R 2013 -, Ninja 400R 2018-, Sprockets, Various parts, Yamaha, YZF-1000 R1 2002- 6, YZF-1000 R1 2007- 8, YZF-1000 R1 2009- 14, YZF-600 R6 2006- 7, YZF-600 R6 2008- 12, YZF-R25/R3Fuel Tank, GRP, NSR250 MC28, Unpainted
€1,036.32
Fuel Tank, GRP, NSR250 MC28, Unpainted
Top quality reproduction of the steel MC28 fuel tank in GRP. This product is a direct replacement for the stock fuel tank and saves approx. a third of the weight of the stock one (2.6 kg ours, 3.9kg for the steel one).
Using specially formulated epoxy resin for fuel resistance, this tank has been tested with a range of fuels from 95 unleaded pump fuel to E85 (85% ethanol).
Laminated with a Kevlar layer for abrasion and puncture resistance, this fuel tank is both strong and light. Unlike most aftermarket fuel tanks, this one is designed so that there is no compromise with installation and through use of high quality CNC machined aluminium inserts, retains the original associated hardware including the stock Honda or keyless fuel tank filler caps and stock fuel cock.
Like the stock Honda fuel tank, it has the correct plumbing for the Honda type breather valve incorporated in the design and also the overflow/drain tube. Uses the stock Honda mounting rubbers for ease and peace of mind in fitment.
This product can be used on all MC28 model NSR250s and MC21 models if fitted with an MC28 compatible seat cowling. This means that if you have an MC21 and would like to install this tank, it is possible by installation with any of the following TYGA seat cowling sets:
BPFS-0005
BPFS-0006
BPFS-0045
BPFS-0046
BPFS-0133
BPFS-0134
BPFS-0135
BPFS-0136
BPFT-0007
BPCT-0007
TYGA no: BPFG-0001
SKU: hon-10983 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, High performance, Honda, NSR250, NSR250 MC21, NSR250 MC28Cover headlight upper cowling (pair) yellow, Honda VFR400 – RVF400
€27.34
Cover, (yellow), pair, Headlight, Upper Cowling, Endurance
To be used on the TYGA Endurance Fairings for NC30/35
TYGA no: SCRE-9011
SKU: hon-10644 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Honda, RVF400RR NC35, VFR400RR NC30Splitpen pro arm
€2.49
This R-Clip is a simple and racey look alternative to the standard slip pin used in the rear wheel axle of all Honda Proarms.
TYGA no: NUBO-0001
SKU: hon-10119 Categories: ALL products, Honda, NSR250 MC28, RVF400RR NC35, Shop, Universal parts, Various parts, Various parts, Various parts, VFR400RR NC30, VFR750R RC30Silencer stainless steel round /carbon end cap 380mm (4 stroke) 2
€271.40
Silencer, Stainless/Carbpn End Cap, Round, 2 x 380 mm., Assy.
This silencer has polished stainless steel endcaps and a hairline finish stainless tube for a lightweight and attractive finish. Free flowing, this silencer not only allows for more power but gives a much more rewarding audible experience over stock. This system may not comply to specific country noise emission regulations and is not homologated for street use.
The ‘slip-on’ mount is designed to fit any system with a 2 external diameter tail pipe. It is secured in place with two springs, which align with the spring hooks already fitted to the TYGA pipe. A silencer mounting clamp is also provided to secure the silencer to the bike.
Two extra (stainless) spring hooks are included and can then be welded to any other system that may need modification to fit the silencer.
Compatible with TYGA and other systems which use a 2 inch external diameter tail pipe, this silencer uses a 4 inch x 380 mm. outside aluminium tube.
TYGA no: EXSL-0146
SKU: alg-10137 Categories: 4 stroke exhaust sets, ALL products, exhaust system replacement parts, Exhaust systems, Exhausts, Exhausts, Exhausts, Honda, RVF400RR NC35, Shop, Silencers, VFR400RR NC30, VFR750F Gen 4, 94-97Carbon fairing set street RVF, NC35
€1,243.26
This kit comprises of the full street carbon fairing for the NC35 complete with headlight fixings. (No indicator mounts moulded into upper)
Does not include screen. Select screen of your choice from our range, or use the Honda stock screen with our bodywork.
PLEASE ALLOW TWO WEEKS BEFORE SHIPPING. PARTS ARE MADE TO ORDER
TYGA no: BPFS-0065
SKU: hon-10133 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Carbon, Honda, RVF400RR NC35, ShopStep kit replacement left side assy, KTM RC125/200/390
€40.16
Tyga Step Kit Replacement left Side Hanger, (Adj.) KTM RC125/200/390 Assy.
Replacement right hanger for your TYGA Step Kit. Complete with mounting bolts.
TYGA no: STAH-0047B
SKU: KTM-10089 Categories: ALL products, CNC parts, CNC parts, CNC parts, KTM, RC 125/200, RC 390